[c-nsp] Cisco ME1200 iCLI

[Holger L]

Hello Paul

On Thu, December 8, 2016 10:36, Williams, Paul wrote:
> Log in to the default shell, and then enter:
> v i e
> v i v

WTF, this Cheatcode works! I got into iCLI now. Thank you Paul!

Best regards
Holger

> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 6 Dec 2016 23:37:34 +0000
> From: Erik Sundberg <ESundberg at nitelusa.com>
> To: Holger L <cisco at entrap.de>, Gregor Jeker
> 	<gregor.jeker at dualstack.ch>
> Cc: cisco-nsp <cisco-nsp at puck.nether.net>
> Subject: Re: [c-nsp] Cisco ME1200 iCLI
> Message-ID:
> 	<495D0934DA46854A9CA758393724D5905A45DC75 at NI-MAIL02.nii.ads>
> Content-Type: text/plain; charset="utf-8"
>
> I was never able to get the iCLI work always was stuck in the awkward
> shell, or GUI. When talking to our cisco SE, he really wasn't familiar
> with it. We didn't spend a lot of time on it and moved on to the next
> project.
>
> If someone could share how to change the device from a Shell like to iCLI,
> that would be appreciated.
>
> -----Original Message-----
> From: Holger L [mailto:cisco at entrap.de]
> Sent: Tuesday, November 29, 2016 7:20 AM
> To: Gregor Jeker
> Cc: Erik Sundberg; cisco-nsp
> Subject: Re: [c-nsp] Cisco ME1200 iCLI
>
> On Mon, November 28, 2016 20:54, Gregor Jeker wrote:
>> Hi Guys
>> We have also been working with a demo pair of those, intended as CPE
>> for some E-Line like services. From my side, I have never seen that
>> weird CLI everyone is talking about, I just started with the console
>> and had a very IOS-like CLI. I got the devices from the demo pool, so
>> maybe someone before hit some magic command, or maybe it depends on
>> the set of credentials or the firmware? I used admin/sandino, the
>> software in use is:
>>
>> ME1200-1# sh ver
>> [...]
>> Active Image
>> ------------
>> Image            : me1200-universal-mz.156-2.SN.dat (primary)
>> Version          : ME1200 OS Software Build 15.4-3.SN
>>
>> ME1200-1# show inventory
>> NAME: "ME1200", DESCR: "Network Interface Device"
>> PID: ME1200-4S-A , VID: V01 , SN: RTC1XXXXXXXX
>>
>> Just to give you some examples of what I am seeing with this device:
>>
>> ME1200-1# sh run int gig 1/1
>> Building configuration...
>> interface GigabitEthernet 1/1
>>  switchport hybrid native vlan 100
>
> Wow that's weird. Why do you get the iCLI and I get this crapy shell? Our
> Image is me1200-universal-mz.156-2.SN which is the same as yours. But our
> OS Version is different, we have "OS Software Build 15.6-2.SN" (same as
> the Image). And I also use the admin/sandino default priv 15 user..
>
>>  Some commands and especially the show outputs are a little different
>> than traditional IOS. However, no problems getting things up&running.
>
> It would be very happy with a shell like yours :) But how to get it?
>
>>  Cheers,
>>  Gregor
>
> Cheers,
> Holger
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>