[c-nsp] SITE-2-SITE GRE Tunnel Problem with 7600 in Core Network

[Shoaib Farhan]

Nick,
May be I didn't clear myself but tunnel are not on 7600 Router. Tunnel are
between CE1 and CE2.

CE1=======>7600=======> CE2

CE1 is cisco 1800 series router.

Here is the config on 7600 Router:

7600 Router:

ip vrf NMS
 rd 38712:14
 route-target export 38712:14
 route-target import 38712:14

mpls label protocol ldp
mpls ldp graceful-restart
mpls traffic-eng tunnels
mls flow ip interface-full
no mls flow ipv6
mls nde sender version 5
mls rate-limit all ttl-failure 70000 150
mls rate-limit all mtu-failure 50000 150
mls cef error action reset
mls mpls recir-agg
mls mpls tunnel-recir


interface GigabitEthernet2/1.14
 description ** NMS-DATA-L3VPN-VID14 **
 encapsulation dot1Q 14
 ip vrf forwarding NMS
 ip address 172.100.50.33 255.255.255.252 secondary
 ip address 172.100.50.65 255.255.255.224
 no ip redirects
 no cdp enable

interface GigabitEthernet2/3.14
 description ** NMS-DATA-L3VPN-VID14 **
 encapsulation dot1Q 14
 ip vrf forwarding NMS
 ip address 172.100.50.41 255.255.255.252


router bgp 38712

address-family ipv4 vrf NMS
  redistribute connected
 exit-address-family



On Thu, Dec 15, 2016 at 5:47 PM, Nick Hilliard <nick at foobar.org> wrote:

> Shoaib Farhan wrote:
> > If someone have any other ideas please share with me.
>
> do any of these tunnels share the same tunnel source ip address on the
> 7600?  They should all have different tunnel source IP addresses.
>
> Nick
>



-- 

Regards,

Md. Shoaib Farhan
<http://www.telnet.com.bd>