[c-nsp] PE "Sprawl" - P/Core Router suggestions.

[CiscoNSP List]

Cheers Ted - Yes, looked at the 903's/RSP3 - I do like them..but they dont support segment routing (OSPF) Only ISIS currently?... and segment routing is something that I want to look at implementing.


________________________________
From: Ted Johansson <ted.johansson at tele2.com>
Sent: Wednesday, 28 December 2016 8:23 PM
To: CiscoNSP List
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] PE "Sprawl" - P/Core Router suggestions.

Have you been looking at the ASR903?
They support 8x10GE LCs and the chassis supports 6 LCs with the A900-RSP3C-400-S. Or perhaps Juniper ACX5000?

Best Regards
Ted

Sent from my Phone
> On 28 Dec 2016, at 05:05, CiscoNSP List <CiscoNSP_list at hotmail.com> wrote:
>
> Hardware currently used are ME3600's/ASR920's/ASR1Ks(LNS/Transit), and TOR switches 4900's, Nex3Ks

******** IMPORTANT NOTICE ********
The content of this e-mail is intended for the addressee(s) only and may contain information that is confidential and/or otherwise protected from disclosure. If you are not the intended recipient, please note that any copying, distribution or any other use or dissemination of the information contained in this e-mail (and its attachments) is strictly prohibited. If you have received this e-mail in error, kindly notify the sender immediately by replying to this e-mail and delete the e-mail and any copies thereof.

Tele2 AB (publ) and its subsidiaries ("Tele2 Group") accepts no responsibility for the consequences of any viruses, corruption or other interference transmitted by e-mail.