[c-nsp] NCS-5001 - sweet...got one in the lab

[Aaron]

XR 6.0.0 ?  I'm just getting to know this box a little... lldp freezes
console and/or telnet when enabled globally, SE says it's not in BASE
release yet... mpls l3vpn isn't in base release either...  so I don't want
to judge XR 6.0.0 yet since as I understand it, I'm dealing a few new
things... at this point and I don't know if my issues are new xr, new xr
redesign on underlying linux vice qnx, new hardware in the ncs-5001

I don't see eigrp.

RP/0/RP0/CPU0:eng-lab-5001-1#conf
Tue Feb  2 08:16:26.487 CST
roRP/0/RP0/CPU0:eng-lab-5001-1(config)#router
router  router-convergence
RP/0/RP0/CPU0:eng-lab-5001-1(config)#router ?
  bgp     BGP configuration subcommands
  hsrp    HSRP configuration subcommands
  isis    ISO IS-IS
  lisp    LISP configuration subcommands
  ospf    OSPF configuration subcommands
  ospfv3  IPv6 Open Shortest Path First protocol (OSPFv3)
  rib     RIB configuration subcommands
  rip     RIP configuration subcommands
  rpl     IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL)
  static  Static route configuration subcommands
  vrrp    VRRP configuration subcommands
RP/0/RP0/CPU0:eng-lab-5001-1(config)#router eigrp 1
                                            ^
% Invalid input detected at '^' marker.
RP/0/RP0/CPU0:eng-lab-5001-1(config)#int ten0/0/0/16
RP/0/RP0/CPU0:eng-lab-5001-1(config-if)#ip eig?
                                        ^
% Invalid input detected at '^' marker.
RP/0/RP0/CPU0:eng-lab-5001-1(config-if)#eig?
                                         ^
% Invalid input detected at '^' marker.
RP/0/RP0/CPU0:eng-lab-5001-1(config-if)#
Uncommitted changes found, commit them before exiting(yes/no/cancel)?
[cancel]:no
RP/0/RP0/CPU0:eng-lab-5001-1#sh pro
processes  protection-notif  protocols
RP/0/RP0/CPU0:eng-lab-5001-1#sh protocols ?
  afi-all  IPv4 and IPv6 commands
  all      All protocols
  bgp      Border Gateway Protocol (BGP)
  ipv4     IPv4 commands
  ipv6     IPv6 commands
  isis     IS-IS protocol
  ospf     IPv4 OSPF protocol
  rip      RIP protocol
  |        Output Modifiers
  <cr>
RP/0/RP0/CPU0:eng-lab-5001-1#sh protocols



-----Original Message-----
From: Gert Doering [mailto:gert at greenie.muc.de] 
Sent: Tuesday, February 2, 2016 1:02 AM
To: Aaron <aaron1 at gvtc.com>
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] NCS-5001 - sweet...got one in the lab

Hi,

On Mon, Feb 01, 2016 at 03:52:00PM -0600, Aaron wrote:
> wow, check out the interface names at the bottom of the list, yeah the 
> names that start with "H" !!

So, how's XR 6.0 like?  Is it true that it does no longer support EIGRP?

(The NCS5k feature list lists OSPF, ISIS etc., but EIGRP is suspiciously
missing...)

gert
--
USENET is *not* the non-clickable part of WWW!
 
//www.muc.de/~gert/
Gert Doering - Munich, Germany
gert at greenie.muc.de
fax: +49-89-35655025
gert at net.informatik.tu-muenchen.de