[c-nsp] MPLS EXP QOS

[CiscoNSP List]

We apply outbound bandwidth shaping to nearly all our service instances on ME3600's without issue...perhaps sharing the error you are getting would help? (And full qos policy)



Cheers


________________________________
From: Mohammad Khalil <eng_mssk at hotmail.com>
Sent: Thursday, 21 January 2016 8:17 PM
To: CiscoNSP List; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] MPLS EXP QOS

I got multiple errors , error in applying service-policy , bandwidth is not supported in the outbound direction (which am aware of)

> From: CiscoNSP_list at hotmail.com
> To: eng_mssk at hotmail.com; cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] MPLS EXP QOS
> Date: Thu, 21 Jan 2016 08:28:27 +0000
>
> >and the other one is ME3600X , my termination with my neighbor is interface Vlan (SVI) , when I tried to apply the configuration on the ME3600X box
> >interface Vlan x
> >service-policy output POLICY
> >I got prompted with error in applying QoS
>
>
> Are you using service instances under physical Int? If so, Apply the service policy to the service instance...i.e.
>
>
> service instance 1007 ethernet
>
> encapsulation dot1q 1007
>
> rewrite ingress tag pop 1 symmetric
>
> service-policy output FOO_BAR_20MB
>
>
> then vlan int just has vrf (If using one) and L3 conf etc
>
>
> HTH