[c-nsp] MPLS EXP QOS

[Mohammad Khalil]

Hi
Am not using service-instances on my ME3600X , it's normal SVI

From: CiscoNSP_list at hotmail.com
To: eng_mssk at hotmail.com; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] MPLS EXP QOS
Date: Thu, 21 Jan 2016 09:21:23 +0000












We apply outbound bandwidth shaping to nearly all our service instances on ME3600's without issue...perhaps sharing the error you are getting would help? (And full qos policy)









Cheers







From: Mohammad Khalil <eng_mssk at hotmail.com>

Sent: Thursday, 21 January 2016 8:17 PM

To: CiscoNSP List; cisco-nsp at puck.nether.net

Subject: RE: [c-nsp] MPLS EXP QOS
 


I got multiple errors , error in applying service-policy , bandwidth is not supported in the outbound direction (which am aware of)



> From: CiscoNSP_list at hotmail.com

> To: eng_mssk at hotmail.com; cisco-nsp at puck.nether.net

> Subject: Re: [c-nsp] MPLS EXP QOS

> Date: Thu, 21 Jan 2016 08:28:27 +0000

> 

> >and the other one is ME3600X , my termination with my neighbor is interface Vlan (SVI) , when I tried to apply the configuration on the ME3600X box

> >interface Vlan x

> >service-policy output POLICY

> >I got prompted with error in applying QoS

> 

> 

> Are you using service instances under physical Int? If so, Apply the service policy to the service instance...i.e.

> 

> 

> service instance 1007 ethernet

> 

> encapsulation dot1q 1007

> 

> rewrite ingress tag pop 1 symmetric

> 

> service-policy output FOO_BAR_20MB

> 

> 

> then vlan int just has vrf (If using one) and L3 conf etc

> 

> 

> HTH