[c-nsp] Cisco 6513-E and Modules

[Alireza Soltanian]

Hi Everybody

I have some questions about Module setup on Cisco 6513-E

1- As far as I understood, If we use SUP-2T on C6513-E, the Fabric Switch
Capacity will be 80Gbps(2x40Gbps Channels). Is this correct?
2- We can install WS-x6748-SFP on this setup with DFC4. Is this Correct?
3- Can we install WS-x6708-10G on this setup with DFC4 or Not?
4- If no then can we use WS-x6716-10G with DFC4?

Thank you for your help and support
Alireza