[c-nsp] Cisco 6513-E and Modules

[Paul]

1. yes in 11 slots
2. yes
3. 6708 does not have DFC4 or CFC modes, so is not compatible with 
sup2t, you can use ws-6908-10g
4. yes

see documentation config notes:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/hardware/Config_Notes/OL_24918.pdf


On 1/22/2016 2:18 AM, Alireza Soltanian wrote:
> Hi Everybody
>
> I have some questions about Module setup on Cisco 6513-E
>
> 1- As far as I understood, If we use SUP-2T on C6513-E, the Fabric Switch
> Capacity will be 80Gbps(2x40Gbps Channels). Is this correct?
> 2- We can install WS-x6748-SFP on this setup with DFC4. Is this Correct?
> 3- Can we install WS-x6708-10G on this setup with DFC4 or Not?
> 4- If no then can we use WS-x6716-10G with DFC4?
>
> Thank you for your help and support
> Alireza
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

-- 
GloboTech Communications
Phone: 1-514-907-0050 x 215
Toll Free: 1-(888)-GTCOMM1
Fax: 1-(514)-907-0750
paul at gtcomm.net
http://www.gtcomm.net