[c-nsp] Cisco 6513-E and Modules

[Alireza Soltanian]

Thanks for the answer Another question. If we use 6716 or 6748 then will
Fabric Switch be 80Gbps or not for these cards as well?
On Jan 27, 2016 5:36 AM, "Paul" <paul at gtcomm.net> wrote:

> 1. yes in 11 slots
> 2. yes
> 3. 6708 does not have DFC4 or CFC modes, so is not compatible with sup2t,
> you can use ws-6908-10g
> 4. yes
>
> see documentation config notes:
>
> http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/hardware/Config_Notes/OL_24918.pdf
>
>
> On 1/22/2016 2:18 AM, Alireza Soltanian wrote:
>
>> Hi Everybody
>>
>> I have some questions about Module setup on Cisco 6513-E
>>
>> 1- As far as I understood, If we use SUP-2T on C6513-E, the Fabric Switch
>> Capacity will be 80Gbps(2x40Gbps Channels). Is this correct?
>> 2- We can install WS-x6748-SFP on this setup with DFC4. Is this Correct?
>> 3- Can we install WS-x6708-10G on this setup with DFC4 or Not?
>> 4- If no then can we use WS-x6716-10G with DFC4?
>>
>> Thank you for your help and support
>> Alireza
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
> --
> GloboTech Communications
> Phone: 1-514-907-0050 x 215
> Toll Free: 1-(888)-GTCOMM1
> Fax: 1-(514)-907-0750
> paul at gtcomm.net
> http://www.gtcomm.net
>
>