[c-nsp] ASR 920 firmware bugs in 03.18.00.S / 15.6(2)S

Chris Welti chris.welti at switch.ch
Fri Jul 8 08:37:44 EDT 2016


On 06/07/16 17:44, Adrian Minta wrote:
> On 07/04/2016 04:29 PM, Chris Welti wrote:
>> Hi all,
>>
>> I can confirm that the bug has been fixed in 03.18.01.S / 15.6(2)S1
>> which is now out on CCO.
>>
>> Caution, after the first reload when you upgrade from a previous
>> version, there will be a FPGA upgrade and thus a second (automatic)
>> reboot.
>> Consider a longer maintenance window since a reload takes its times on
>> these devices :)
>>
>> Best regards,
>> Chris
>>
>>
>
> The bug is 99% fixed.
> The log message when you remove the sfp+ transceiver is "changed state
> to administratively down" but this is mostly a cosmetic issue.
>

You are right, I didn't even catch that.

In my logs:

Jul  7 13:29:21.220: %LINK-5-CHANGED: Interface TenGigabitEthernet0/0/26, changed state to administratively down
Jul  7 13:29:24.238: %LINK-3-UPDOWN: Interface TenGigabitEthernet0/0/26, changed state to down
Jul  7 13:37:58.873: %LINK-5-CHANGED: Interface TenGigabitEthernet0/0/26, changed state to administratively down
Jul  7 13:38:01.859: %LINK-3-UPDOWN: Interface TenGigabitEthernet0/0/26, changed state to down

Maybe they still put it to admin down but have an EEM script that re-enables it again as a workaround :-)

I currently don't have one in the lab anymore, could you check when you just remove a transceiver you get a second message with
"changed state to down" after 3 seconds as well?

Chris





More information about the cisco-nsp mailing list