[c-nsp] err-disable state on a cisco 3750 catalyst

[A.L.M.Buxey at lboro.ac.uk]

Hi,

> Jul 12 17:30:36.218: %PM-4-ERR_DISABLE: channel-misconfig error detected on
> Gi1/0/1, putting Gi1/0/1 in err-disable state

so...what is the cause of this.  check the config of gi1/0/1, ensure it matches
the methods/speed etc of other members of the port-channel etc its been assigned to

> The port is in err-disable regularly .. a shut and no shut that's restart

err-disable doing its job

> there is a solution to disable the errdisable on this type of switch?

huh???? its currently likely saving your a** from something far worse happening on your network.

alan