[c-nsp] Modify access list via SNMP

[Nicolas KARP]

Hello,

If you hve SNMP write access, you can push a config file to your router
with the access-list you want to create or modify. The config file could be
dowloaded by the router via TFTP.

http://www.cisco.com/c/en/us/support/docs/ip/simple-network-management-protocol-snmp/7910-11-7910.html#copying2


# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - -
# - -   Nicolas KARP
# - -   Network and Security Engineer
# - -    Email : liste at karp.fr <nicolas at karp.fr>
# - -    Linkedin :  http://www.linkedin.com/in/nicolaskarp
# - -    Viadeo : http://www.viadeo.com/fr/profile/nicolas.karp
<http://www.viadeo.com/fr/profile/nicolas.karp%20>
# - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - -



2016-07-12 14:59 GMT+02:00 Mohammad Khalil <eng_mssk at hotmail.com>:

> Check the below link , it might help you
> https://supportforums.cisco.com/discussion/10732136/snmp-modify-or-add-acl
>
> BR,
> Mohammad
>
> > Date: Tue, 12 Jul 2016 15:37:37 +0300
> > From: romka at kharkov.org.ua
> > To: cisco-nsp at puck.nether.net
> > Subject: [c-nsp] Modify access list via SNMP
> >
> > Hi,
> >
> > We  have  ASR 1002 and i want modify access list (add\remove entries)
> > via  SNMP, this is possible yet? Can someone show me links where i can
> > get  info  about  this. If you have some examples this will be good also.
> > Thanks.
> >
> > Regards,
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>