[c-nsp] Bug in stat counters with VLANs?

Job Snijders job at instituut.net
Mon Jun 6 08:32:37 EDT 2016


Could be CSCut70604 - Logical interface counters doubled when uRPF enabled


  Original Message  
From: Job Snijders‎
Sent: maandag 6 juni 2016 14:14
To: Hank Nussbacher; c-nsp
Subject: Re: [c-nsp] Bug in stat counters with VLANs?

Do you have urpf (loose) enabled?

Job

  Original Message  
From: Hank Nussbacher
Sent: maandag 6 juni 2016 14:10
To: c-nsp
Subject: [c-nsp] Bug in stat counters with VLANs?

Running IOS-XR v.5.1.3 on ASR9010 and the "show interface" stats for
sub-VLANs seems to be totally off:

TenGigE0/1/1/7 is up, line protocol is up
30 second input rate 6689925000 bits/sec, 738298 packets/sec
30 second output rate 1330888000 bits/sec, 396078 packets/sec

TenGigE0/1/1/7.333 is up, line protocol is up
30 second input rate 9324818000 bits/sec, 1133227 packets/sec
30 second output rate 1273437000 bits/sec, 355218 packets/sec

TenGigE0/1/1/7.100 is up, line protocol is up
30 second input rate 4164891000 bits/sec, 354715 packets/sec
30 second output rate 80678000 bits/sec, 47826 packets/sec

Shouldn't the 2 VLANs total the same amount as the primary interface? 
Is there a bugid for this issue?


Thanks,
Hank

_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list