[c-nsp] Bug in stat counters with VLANs?

[Hank Nussbacher]

On 06/06/2016 15:14, Job Snijders wrote:
> Do you have urpf (loose) enabled?
Bingo!

Thanks,
Hank
>
> Job
>
>   Original Message  
> From: Hank Nussbacher
> Sent: maandag 6 juni 2016 14:10
> To: c-nsp
> Subject: [c-nsp] Bug in stat counters with VLANs?
>
> Running IOS-XR v.5.1.3 on ASR9010 and the "show interface" stats for
> sub-VLANs seems to be totally off:
>
> TenGigE0/1/1/7 is up, line protocol is up
> 30 second input rate 6689925000 bits/sec, 738298 packets/sec
> 30 second output rate 1330888000 bits/sec, 396078 packets/sec
>
> TenGigE0/1/1/7.333 is up, line protocol is up
> 30 second input rate 9324818000 bits/sec, 1133227 packets/sec
> 30 second output rate 1273437000 bits/sec, 355218 packets/sec
>
> TenGigE0/1/1/7.100 is up, line protocol is up
> 30 second input rate 4164891000 bits/sec, 354715 packets/sec
> 30 second output rate 80678000 bits/sec, 47826 packets/sec
>
> Shouldn't the 2 VLANs total the same amount as the primary interface? 
> Is there a bugid for this issue?
>
>
> Thanks,
> Hank
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>