[c-nsp] ASR920 port based xconnect equivalent

[Adam Vitkovsky]

> Erik Sundberg
> Sent: Friday, June 03, 2016 7:52 PM
>
> Example UNI Port XConnect, supporting mtu 9180, and l2cp, EoMPLS
> Xconnect
>
> interface GigabitEthernet0/9
>  description My UNI Port
>  switchport trunk allowed vlan none
>  switchport mode trunk
>  mtu 9180
>  service instance 1 ethernet
>   encapsulation default
>   l2protocol tunnel cdp stp vtp
-isn't L2PT required only in case the providers network is actually L2 switched environment (running STP internally)?



adam




        Adam Vitkovsky
        IP Engineer

T:      0333 006 5936
E:      Adam.Vitkovsky at gamma.co.uk
W:      www.gamma.co.uk

This is an email from Gamma Telecom Ltd, trading as “Gamma”. The contents of this email are confidential to the ordinary user of the email address to which it was addressed. This email is not intended to create any legal relationship. No one else may place any reliance upon it, or copy or forward all or any of it in any form (unless otherwise notified). If you receive this email in error, please accept our apologies, we would be obliged if you would telephone our postmaster on +44 (0) 808 178 9652 or email postmaster at gamma.co.uk

Gamma Telecom Limited, a company incorporated in England and Wales, with limited liability, with registered number 04340834, and whose registered office is at 5 Fleet Place London EC4M 7RD and whose principal place of business is at Kings House, Kings Road West, Newbury, Berkshire, RG14 5BY.
---------------------------------------------------------------------------------------
 This email has been scanned for email related threats and delivered safely by Mimecast.
 For more information please visit http://www.mimecast.com
---------------------------------------------------------------------------------------