[c-nsp] asr920 - push two vlans

[Mike]

On 06/22/2016 11:50 AM, Aaron wrote:
> If IOS XE on the 920 is similar to IOS on ME3600 at least to the extent of
> efp (si) implementation.... then perhaps this will work (taken from my
> operational me3600)
>
> interface GigabitEthernet0/1
> switchport trunk allowed vlan none
>   switchport mode trunk
>   mtu 9202
>   load-interval 30
>   speed nonegotiate
>   service instance 1000 ethernet
>    encapsulation dot1q 1000 second-dot1q 100
>    rewrite ingress tag pop 2 symmetric
>    l2protocol tunnel
>    xconnect 10.101.0.15 10000 encapsulation mpls
>     mtu 1500
>
>


Actually no the 920 is more like the asr1000 and not like the me3600's 
at all. I did try the above and it doesn't seem to work. It would seem 
that only tagged packets entering the port would work anyways. I am 
trying to put tags on untagged frames.

Mike-