[c-nsp] c6500 process memory

[Paul]

I assume it's a sup720, there's nothing you can do. Make sure you stay 
on the old code train SXI or SXJ and that's about it.

Eventually it will run out of ram before it runs out of tcam space (bad 
design on their part i guess)

Cisco could work around this by implementing compression or offloading 
some more processes to the SP but I doubt they have interest in reviving 
the old platform.

70% is nothing really, I wouldn't worry about it until it's over 95%


On 6/30/2016 12:18 PM, james list wrote:
> Dear experts,
> just to ask if there are any guidance or best practice about process memory
> utilization, currently on my C6500 I'm at 70% usage and would like to know
> if I need to be alterted or not...
>
> I use this box for full routing table (BGP process is the higher memory
> user)...
>
> Kind regards
> James
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>