[c-nsp] ASR1006 RP2 8G vs 16G memory

[Lukas Tribus]

> We are finally buying ASR1006 but now question is should we go
> with 8G or 16G memory and where router use most it's memory?
> We are going to run BGP but with default route so where
> memory going to use?
>
> Requirement. (Do we really need 16GB?)
>
> 1. BGP default route
> 2. 20 to 30 ACL
> 3. 5 to 10 PBR policy
> 4. 10G traffic at sometime at peek.

8 GB RAM would be enough even if you had a full BGP table.


Lukas