[c-nsp] ISR4431 memory usage

[CiscoNSP List]

Hi Everyone,


Purchased a couple of ISR4431's for a small POP,  that has a single IPTransit service (Currently being handled by an old 2851, taking full table and default)....obviously full table not necessary, but we had a customer at this POP that wanted the full table advertised to them, so we needed to take it from the upstream.


2851 handles the full table no problems - only has 1Gb dram, and is using ~57% ram


The 4431's we purchased to replace the 2851 have (default) 4Gb ram, and I was a little shocked when I turned them on to see that with virtually no config on them, they are already using ~83-84% of the ram:


#show platform software status control-processor brief
Load Average
 Slot  Status  1-Min  5-Min 15-Min
  RP0 Healthy   0.00   0.00   0.00

Memory (kB)
 Slot  Status    Total     Used (Pct)     Free (Pct) Committed (Pct)
  RP0 Healthy  3972052  3317944 (84%)   654108 (16%)   1530296 (39%)


sh platform resources
**State Acronym: H - Healthy, W - Warning, C - Critical
Resource                 Usage                 Max             Warning         Critical        State
----------------------------------------------------------------------------------------------------
RP0 (ok, active)                                                                               H
 Control Processor       5.81%                 100%            90%             95%             H
  DRAM                   3240MB(83%)           3878MB          90%             95%             H
ESP0(ok, active)                                                                               H
 QFP                                                                                           H
  DRAM                   1609582KB(76%)        2097152KB       80%             90%             H
  IRAM                   0KB(0%)               0KB             80%             90%             H


..and iosd looks to be the main user:


#monitor platform software process rp active

top - 09:59:58 up 7 days, 23:38,  0 users,  load average: 0.00, 0.00, 0.00
Tasks: 380 total,   4 running, 376 sleeping,   0 stopped,   0 zombie
Cpu(s):  0.7%us,  1.7%sy,  0.0%ni, 97.6%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st
Mem:   3972052k total,  3324360k used,   647692k free,   211736k buffers
Swap:        0k total,        0k used,        0k free,  1705968k cached

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
30505 root      20   0 9830m 161m 113m R   10  4.2   1226:27 fman_fp_image
23117 root      20   0 2205m 709m 341m S    3 18.3 258:15.06 linux_iosd-imag
20408 root      20   0  288m  73m  30m S    2  1.9 192:48.66 bsm
 2142 root      20   0 72468  24m  18m S    1  0.6  69:33.01 iomd



...Now, my question is, can we "safely" take the full table on the 4431's...Ive had a read of the following: http://www.cisco.com/c/en/us/td/docs/routers/access/4400/troubleshooting/memorytroubleshooting/isr4000_mem.html


And it mentions that iosd/memory allocation is allocated as "needed"...but Im not clear on whether the way the platform allocates memory, will allow us to take a full table with 4Gb ram.....Im really hoping it will, and we dont have to upgrade the ram on them?


Cheers.



[http://www.cisco.com/web/fw/i/logo-open-graph.gif]<http://www.cisco.com/c/en/us/td/docs/routers/access/4400/troubleshooting/memorytroubleshooting/isr4000_mem.html>

Memory Troubleshooting Guide for Cisco 4000 Series ISRs<http://www.cisco.com/c/en/us/td/docs/routers/access/4400/troubleshooting/memorytroubleshooting/isr4000_mem.html>
www.cisco.com
DRAM for Cisco 4300 Series ISRs . Cisco 4300 ISR platforms use 1600MHz DIMMs for memory. The platforms have one or two DIMM slots for main system memory.