[c-nsp] c7301 and hot-swapping of PAs?

[Sebastian Becker]

Hi all,

they state that also for the 7600 but there will be an interrupt on the bus so do not expect that insertion or removal will be happen without any packet loss.
At least you do not have to power off the boxes to install or remove a card.

-- 
Sebastian Becker
sb at lab.dtag.de

> Am 10.11.2016 um 23:05 schrieb Juergen Marenda <cnsp at marenda.net>:
> 
> 
> Hi Gert,
> 
>> I know I used to know this, but my memory is aging faster than the
> hardware... can PAs in a 7301 (= 1RU / 7200 / NPE-G1) be hot-plugged or not?
> 
> According to the install guide, they can be hot-plugged:
> 
> "Online insertion and removal (OIR) Allows you to add, replace, or remove
> port adapters with minimal interruption of the system"
> 
> From
> http://www.cisco.com/c/en/us/td/docs/routers/7300/install_and_upgrade/7301/7
> 301_install_and_config_guide/7301icg/5418o.html
> 
> Hope this help's,
> 
> Juergen.
> --
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/