[c-nsp] Cat 6500/sup720 doesn't boot

[Painting, Stuart]

Aside from it being a boot image rather than an IOS image, there is another issue. Can ROMMON 8.1(3) boot IOS 12.2(33)SXI at all? I thought you needed (CatOS) ROMMON 8.5.4...

See if you can get your hands on an IOS 12.2(17)SXF image. You may have more luck booting it.


-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of listas at cutre.net
Sent: 29 November 2016 10:51
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Cat 6500/sup720 doesn't boot

Hello all

I got a Cat6504 with sup720 that supposely worked when it was dismounted (same company, another division) but it came without a CF.

So I formated a CF in another 6500, copied the IOS and tried to boot from disk0 without luck. I tried erasing nvram and I even copied a boot image and the IOS ROMMON image to the CF but I always got the same message:


rommon 1 > boot disk0:s72033-boot-mz.122-33.SXI14.bin
Loading image, please wait ...


*** TLB (Store) Exception ***
Access address = 0x10000403
PC = 0x8000f800, Cause = 0xc, Status Reg = 0x30409003

monitor: command "boot" aborted due to exception
rommon 2 > boot disk0:c6msfc3-rm2.srec.122-17r.SX7
Please reset before booting
rommon 3 > reset

System Bootstrap, Version 8.1(3)
Copyright (c) 1994-2004 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory

Autoboot: failed, BOOT string is empty
rommon 1 > boot disk0:c6msfc3-rm2.srec.122-17r.SX7
Loading image, please wait ...


*** TLB (Store) Exception ***
Access address = 0x10000403
PC = 0x8000f800, Cause = 0xc, Status Reg = 0x30409003

Does anybody can provide any help or pointer to help? Cisco website wasn’t of too much hep.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/