[c-nsp] Cat 6500/sup720 doesn't boot

[listas at cutre.net]

Hello

In fact the CF also has a IOS (dir made in another router):
SUP-ROU2#dir flash:
Directory of flash:/

    2  -rw-      669827  Nov 29 2016 10:38:58 +00:00  c6msfc3-rm2.srec.122-17r.SX7
    1  -rw-   118713700  Nov 24 2016 15:11:42 +00:00  s72033-adventerprisek9_wan-mz.122-33.SXI13.bin
    3  -rw-    15869668  Nov 29 2016 10:42:24 +00:00  s72033-boot-mz.122-33.SXI14.bin

What amuses me is that if from the ROMMON I try to do a dir:
rommon 3 > dir disk0:

*** TLB (Store) Exception ***
Access address = 0x10000403
PC = 0x8000f800, Cause = 0xc, Status Reg = 0x30409003

monitor: command "dir" aborted due to exception

I will try with 12.2(17)SXF

Regards an thanks

> El 29/11/2016, a las 12:17, Painting, Stuart <Stuart.Painting at TheAA.com> escribió:
> 
> Aside from it being a boot image rather than an IOS image, there is another issue. Can ROMMON 8.1(3) boot IOS 12.2(33)SXI at all? I thought you needed (CatOS) ROMMON 8.5.4...
> 
> See if you can get your hands on an IOS 12.2(17)SXF image. You may have more luck booting it.
> 
> 
> -----Original Message-----
> From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of listas at cutre.net
> Sent: 29 November 2016 10:51
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Cat 6500/sup720 doesn't boot
> 
> Hello all
> 
> I got a Cat6504 with sup720 that supposely worked when it was dismounted (same company, another division) but it came without a CF.
> 
> So I formated a CF in another 6500, copied the IOS and tried to boot from disk0 without luck. I tried erasing nvram and I even copied a boot image and the IOS ROMMON image to the CF but I always got the same message:
> 
> 
> rommon 1 > boot disk0:s72033-boot-mz.122-33.SXI14.bin
> Loading image, please wait ...
> 
> 
> *** TLB (Store) Exception ***
> Access address = 0x10000403
> PC = 0x8000f800, Cause = 0xc, Status Reg = 0x30409003
> 
> monitor: command "boot" aborted due to exception
> rommon 2 > boot disk0:c6msfc3-rm2.srec.122-17r.SX7
> Please reset before booting
> rommon 3 > reset
> 
> System Bootstrap, Version 8.1(3)
> Copyright (c) 1994-2004 by cisco Systems, Inc.
> Cat6k-Sup720/SP processor with 524288 Kbytes of main memory
> 
> Autoboot: failed, BOOT string is empty
> rommon 1 > boot disk0:c6msfc3-rm2.srec.122-17r.SX7
> Loading image, please wait ...
> 
> 
> *** TLB (Store) Exception ***
> Access address = 0x10000403
> PC = 0x8000f800, Cause = 0xc, Status Reg = 0x30409003
> 
> Does anybody can provide any help or pointer to help? Cisco website wasn’t of too much hep.
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/