[c-nsp] VRF-Lite between PE

[Maile Halatuituia]

?somebody ???

________________________________
From: Maile Halatuituia
Sent: Thursday, October 20, 2016 9:35 AM
To: cisco-nsp at puck.nether.net
Subject: VRF-Lite between PE


Hi


I have this scenario.


CUSTOMER -------- PE1 ----------- PE2 --------CUSTOMER
                                    |                    |


                                    |                    |
                            Primary                Secondary
                                LINK                    LINK

My situation is that my PE L3 Switch router does not support MPLS.

I also want to use VRF to differentiate my customer departments.

The main goal is that if Primary link to internet fails, internet traffic goes automatically to Secondary Link.

OSPF with in VRF on both PE1 to get the default route from the two Internet router then distribute that to the two Primary and Secondary VRF so that it can import to departments VRF. Therefore they can reach internet.

I have two issues


1. I want to connect the two LINK router to both the PE for redundancy if any PE and a LINK Router fails. I assume i will include the second link to my ospf at the moment but not sure how i will use cost or set it up so that it will fail over.


2. Secondary is it possible if  VRF A on PE2 recieves routes from VRF A on PE1 after create it with same  rd on both PE. Or maybe that's the function for mpls but i dont have that in my PE.


I hope i make my case clear.

Really appreciate and feedback or hint or some kind of advice.

Thanks in advance.

Maile.


Confidentiality Notice: This email (including any attachment) is intended for internal use only. Any unauthorized use, dissemination or copying of the content is prohibited. If you are not the intended recipient and have received this e-mail in error, please notify the sender by email and delete this email and any attachment.