[c-nsp] Port-Channel interface as the source for SPAN

[Andriy Bilous]

Just a follow-up. Po interface is a L3 channel with subinterface po631.2310
configured, adding filter vlan 2310 solved the problem.

On Wed, Aug 16, 2017 at 7:53 PM, Urmanov Maxim <maugli13 at gmail.com> wrote:

> Hello, try to add "switchport monitor" for span destination port, it
> should work
>
> 16 авг. 2017 г. 1:40 ПП пользователь "Andriy Bilous" <
> andriy.bilous at gmail.com> написал:
>
>> Hello,
>>
>> I am trying to configure SPAN session with port-channel interface as the
>> source
>>
>> monitor session 2
>>   source interface port-channel631 both
>>   destination interface Ethernet5/30
>>   no shut
>>
>> However on the sniffer I see only locally generated frames - CDP, LLDP,
>> UDLD and no transit traffic. Am I missing something?
>>
>> sh ver | i system:
>>   system:    version 6.2(14)
>>
>>
>> Thanks
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>