[c-nsp] STM-1 over MPLS using ASR920

George Giannousopoulos ggiannou at gmail.com
Wed Jul 12 04:43:00 EDT 2017


Hi,

My understanding is that the OC3 module must be used when you need to
transport channelized STM-1 or when you need to terminate multiple E1
circuits to a single STM-1 interface.
I think TSOP Smart SFP supports only clear channel STM-1.

I'm currently testing both scenarios and I'll be able to provide some
feedback within the next two weeks

--
George

On Wed, Jul 12, 2017 at 10:40 AM, Lukas Tribus <luky-37 at hotmail.com> wrote:

> > This it ?
>
> The below. Looking for feedback from the field.
>
>
> TsoP Smart SFP [2]:
> ONS-SC-155-TSOP -> “TSoP Smart SFP” da inserire in uno slot SFP 1GE nel
> ASR920
>
> TsoP in OC3 module [1], [2]:
> Modulo A900-IMA4OS + SFP OC3 ONS-SI-155-I1 -> qua occupiamo lo slot nel
> ASR920
>
> VCoP Smart SFP [3]:
> ONS-SI-OC-VCOP: VCoP Smart SFP 155/622 in SFP o SFP+.
>
> Vedi anche:
> [1] ASR920 High-Port-Density Models Data Sheet
> http://www.cisco.com/c/en/us/products/collateral/routers/
> asr-920-series-aggregation-services-router/datasheet-c78-733397.html
>
> [2] ASR920 TDM Configuration Guide: Transparent SONET or SDH over Packet
> (TSoP) Protocol
> http://www.cisco.com/c/en/us/td/docs/routers/asr920/
> configuration/guide/tdm/tdm-asr920-book/tdm-asr920-book_chapter_0100.html
>
> [3] ASR920 TDM Configuration Guide: Configuring VCoP Smart SFP
> https://www.cisco.com/c/en/us/td/docs/routers/asr920/
> configuration/guide/tdm/tdm-asr920-book/tdm-asr920-book_chapter_0101.html
>


More information about the cisco-nsp mailing list