[c-nsp] ASR9010 problem - CRC ERROR - DATA PATH FAILED

[Aaron Gould]

Any idea why this happened?

 

Serious problems.. Rebooted module, problems stopped.

 

RP/0/RSP0/CPU0:blcn-9k#sh log | in "FABRIC|reset"

Sat Jun  3 18:28:12.835 CDT

LC/0/0/CPU0:Jun  3 16:11:12.936 : pfm_node_lc[267]:
%FABRIC-FIA-1-SUSTAINED_CRC_ERR : Set|fia_lc[151622]|Crossbar
Interface(0x1013000)|Fabric interface ASIC-0 has sustained CRC errors

RP/0/RSP1/CPU0:Jun  3 16:13:47.759 : pfm_node_rp[327]:
%PLATFORM-DIAGS-3-PUNT_FABRIC_DATA_PATH_FAILED :
Set|online_diag_rsp[233590]|System Punt/Fabric/data Path
Test(0x2000004)|failure threshold is 3, (slot, NP) failed: (0, 0) (0, 1)

RP/0/RSP0/CPU0:Jun  3 16:14:07.963 : pfm_node_rp[327]:
%PLATFORM-DIAGS-3-PUNT_FABRIC_DATA_PATH_FAILED :
Set|online_diag_rsp[233590]|System Punt/Fabric/data Path
Test(0x2000004)|failure threshold is 3, (slot, NP) failed: (0, 0) (0, 1)

 

RP/0/RSP0/CPU0:blcn-9k#hw-module location 0/0/CPU0 reload

Sat Jun  3 18:00:44.542 CDT

WARNING: This will take the requested node out of service.

Do you wish to continue?[confirm(y/n)]y

 

sh log | in "FABRIC|reset"

...

RP/0/RSP0/CPU0:Jun  3 18:00:49.706 : shelfmgr[362]:
%PLATFORM-SHELFMGR-6-USER_RESET : Node 0/0/CPU0 is reset due to user reload
request

RP/0/RSP1/CPU0:Jun  3 18:00:58.565 : pfm_node_rp[327]:
%PLATFORM-DIAGS-3-PUNT_FABRIC_DATA_PATH_FAILED :
Clear|online_diag_rsp[233590]|System Punt/Fabric/data Path
Test(0x2000004)|failure threshold is 3, (slot, NP) failed: (0, 0) (0, 1)

RP/0/RSP0/CPU0:Jun  3 18:01:18.847 : pfm_node_rp[327]:
%PLATFORM-DIAGS-3-PUNT_FABRIC_DATA_PATH_FAILED :
Clear|online_diag_rsp[233590]|System Punt/Fabric/data Path
Test(0x2000004)|failure threshold is 3, (slot, NP) failed: (0, 0) (0, 1)

 

- Aaron