[c-nsp] ASR1006 ESP20 SIP10 LAG/LaCP Limitations

[Chuck Church]

It's my understanding that this is the platform limit, and can't be changed.
I don't recall the docs that verified it, but our Cisco SEs told us that.

Chuck

-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
David Deutsch
Sent: Friday, June 9, 2017 8:12 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] ASR1006 ESP20 SIP10 LAG/LaCP Limitations

Hello all,

I've got a new ASR1006(2xESP20, 2xSIP10) and am trying to establish a 8 port
LaCP LAG back to my main switch stack. However getting the following error
when trying to add the 5th interface to the port group:

Error: Cannot exceed 4 interfaces per channel

I'm surprised that this model has such a small limit, can anyone point me to
a model specific document that shows this as a hard limit? or should I look
for an IOS XE command to increase it.

Any advice appreciated.

--David
__________________________________________________


David Deutsch
Chief Technology Officer
Televergence Solutions, Inc.

(213) 943-2012 (Direct)
ddeutsch at tsicorp.net
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/