[c-nsp] ASR1006 ESP20 SIP10 LAG/LaCP Limitations

[David Deutsch]

Looks like it's a limit of 3.7, however Denali 16.3.1 notes appear to
increase this to 16.

However of course, it appears 16.3 doesn't support my SIP10 cards, does
anyone know if this is the case in 16.5 everest?

--David

__________________________________________________


David Deutsch
Chief Technology Officer
Televergence Solutions, Inc.

(213) 943-2012 (Direct)
ddeutsch at tsicorp.net


On Fri, Jun 9, 2017 at 8:44 AM, Chuck Church <chuckchurch at gmail.com> wrote:

> It's my understanding that this is the platform limit, and can't be
> changed.
> I don't recall the docs that verified it, but our Cisco SEs told us that.
>
> Chuck
>
> -----Original Message-----
> From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of
> David Deutsch
> Sent: Friday, June 9, 2017 8:12 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] ASR1006 ESP20 SIP10 LAG/LaCP Limitations
>
> Hello all,
>
> I've got a new ASR1006(2xESP20, 2xSIP10) and am trying to establish a 8
> port
> LaCP LAG back to my main switch stack. However getting the following error
> when trying to add the 5th interface to the port group:
>
> Error: Cannot exceed 4 interfaces per channel
>
> I'm surprised that this model has such a small limit, can anyone point me
> to
> a model specific document that shows this as a hard limit? or should I look
> for an IOS XE command to increase it.
>
> Any advice appreciated.
>
> --David
> __________________________________________________
>
>
> David Deutsch
> Chief Technology Officer
> Televergence Solutions, Inc.
>
> (213) 943-2012 (Direct)
> ddeutsch at tsicorp.net
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>