[c-nsp] 3750 Stack Auto Upgrade

[A.L.M.Buxey at lboro.ac.uk]

Hi,
> Thanks Alan,,
> Do you have any documentation on how to do it?...maybe you could point me in the direction. Alan so you can number a switch before adding to a stack?.

official cisco docs: eg

"Switch Stack Membership"

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750e_3560e/software/release/12-2_55_se/configuration/guide/3750escg/swstack.html

"If you replace a stack member with an identical model, the new switch functions with exactly the same configuration as the replaced switch, assuming that the new switch is using the same member number as the replaced switch"

to renumber a switch, simply power it up isolated, connect to console, skip the setup, use 'conf t' and the switch renumber command,
then dont save config, just power off.

alan