[c-nsp] 3750 Stack Auto Upgrade

[Harry Hambi - Atos]

Thanks Alan,,
Do you have any documentation on how to do it?...maybe you could point me in the direction. Alan so you can number a switch before adding to a stack?.


Rgds
Harry

Harry Hambi BEng(Hons)  MIET  Rsgb


-----Original Message-----
From: A.L.M.Buxey at lboro.ac.uk [mailto:A.L.M.Buxey at lboro.ac.uk]
Sent: 03 March 2017 11:47
To: Harry Hambi - Atos
Cc: 'cisco-nsp at puck.nether.net'
Subject: Re: [c-nsp] 3750 Stack Auto Upgrade

Hi,

> Has anyone one successfully upgraded stacks with the auto upgrade feature?. If a member of a stack failed it would be nice if when replacing the failed unit it would be automatically upgraded from the master. When I say upgraded I mean the IOS and the configuration, is this possible. Any advice appreciated.

yes - new member with old firmware upgraded and then given its correct config by the master


one thing to be aware of, if you are just dropping in a new fresh switch, then the stack will
see it as that...and make it a new member,,,,  ensure that the switch you are adding has been numbered
first.

alan


-----------------------------
http://www.bbc.co.uk
This e-mail (and any attachments) is confidential and
may contain personal views which are not the views of the BBC unless specifically stated.
If you have received it in
error, please delete it from your system.
Do not use, copy or disclose the
information in any way nor act in reliance on it and notify the sender
immediately.
Please note that the BBC monitors e-mails
sent or received.
Further communication will signify your consent to
this.
-----------------------------