[c-nsp] Cisco 6509 / WS-CAC-6000W OUTPUT FAIL

[Laurent Dumont]

I havent seen that exact behavior but I've seen reports of giving the 
front fan of the PSU a slight push to restart the whole thing. Do you 
have a spare chassis to test the PSU?

I had a 6000W fail with the OUTPUT ERROR where the front fan failed to 
start.


On 3/13/2017 11:02 AM, "Rolf Hanßen" wrote:
> Hello,
>
> I have an issue with a C6509 shortly before it will be replaced. ;)
> PS2 shows OUTPUT FAIL (both inputs ok), I already replaced it, no change.
> sh power shows 3780 Watt for PS2, what is that value?
>
> system power redundancy mode = redundant
> system power redundancy operationally = non-redundant
> system power total =     5771.64 Watts (137.42 Amps @ 42V)
> system power used =      2815.26 Watts (67.03 Amps @ 42V)
> system power available = 2956.38 Watts (70.39 Amps @ 42V)
>                          Power-Capacity PS-Fan Output Oper
> PS   Type               Watts   A @42V Status Status State
> ---- ------------------ ------- ------ ------ ------ -----
> 1    WS-CAC-6000W       5771.64 137.42 OK     OK     on
> 2    WS-CAC-6000W       3780.00 90.00  -      -      off
>                          Pwr-Allocated  Oper
> Fan  Type               Watts   A @42V State
> ---- ------------------ ------- ------ -----
> 1    WS-C6509-E-FAN      210.00  5.00  OK
>                          Pwr-Requested  Pwr-Allocated  Admin Oper
> Slot Card-Type          Watts   A @42V Watts   A @42V State State
> ---- ------------------ ------- ------ ------- ------ ----- -----
> 1    WS-X6748-GE-TX      325.50  7.75   325.50  7.75  on    on
> 2    WS-X6748-GE-TX      325.50  7.75   325.50  7.75  on    on
> 3    WS-X6748-GE-TX      325.50  7.75   325.50  7.75  on    on
> 5    WS-SUP720-3B        282.24  6.72   282.24  6.72  on    on
> 6    (Redundant Sup)       -     -      282.24  6.72  -     -
> 7    WS-X6704-10GE       295.26  7.03   295.26  7.03  on    on
> 8    WS-X6708-10GE       473.76 11.28   473.76 11.28  on    on
> 9    WS-X6704-10GE       295.26  7.03   295.26  7.03  on    on
> system auxiliary power mode = off
> system auxiliary power redundancy operationally = non-redundant
> system primary connector power limit =   10920.00 Watts (260.00 Amps @ 42V)
> system auxiliary connector power limit = 10500.00 Watts (250.00 Amps @ 42V)
> system primary power used =              2815.26 Watts (67.03 Amps @ 42V)
> system auxiliary power used =            0 Watt
>
> Anyone seen such behaviour yet?
> Maybe chassis defective?
>
> kind regards
> Rolf
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/