[c-nsp] Cisco 6509 / WS-CAC-6000W OUTPUT FAIL

[Laurent Dumont]

Could it be the  "A @42V" value? What kind of circuits do you have for 
each PSU? The 6000W can either take two 120V-20A or  a single 240V-20A 
if you need the full 6000W.


On 3/14/2017 5:42 AM, James Bensley wrote:
> On 13 March 2017 at 15:02, "Rolf Hanßen" <nsp at rhanssen.de> wrote:
>>                          Power-Capacity PS-Fan Output Oper
>> PS   Type               Watts   A @42V Status Status State
>> ---- ------------------ ------- ------ ------ ------ -----
>> 1    WS-CAC-6000W       5771.64 137.42 OK     OK     on
>> 2    WS-CAC-6000W       3780.00 90.00  -      -      off
> Why is one of these 6kW PSUs saying 4kW of power capacity? Since they
> are the same model PSU I think the power capacity has to match on
> them?
>
> Cheers,
> James.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/