[c-nsp] Mixing power supply wattage in 6513

[Paul]

Yeah this is no problem. The only issue is if the other power supply 
doesn't put enough wattage to run the line cards then there won't be 
redundancy for some line cards if the other PS fails.



On 5/5/2017 8:31 AM, Drew Weaver wrote:
> Howdy,
>
> We had a PSU failure in a 6513 and we want to replace the failed one (which is a: WS-CAC-4000W) but currently what we have in stock is a whole lot of these: WS-CAC-6000W
>
> I know that it should be possible to run a switch with two different sized power supplies (because it would make upgrading possible) but are there any known caveats to this?
>
> Thanks,
> -Drew
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>