[c-nsp] cisco ip nat question

[Nick Cutting]

There is more to it.

What is the model and code version of the router? - we need these to help you with the configuration.

-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mike
Sent: Thursday, November 9, 2017 6:50 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] cisco ip nat question

This message originated outside of your organisation.

Hi,


     I have a bunch of dumb devices that don't know how to deal with a default gateway. They all live in a subnet 172.16.144.0/20.

     A router lives here @ 172.16.144.1, and my device management station lives on another network, say 10.0.1.0/24.

     What I think I want, is for packets going from my management station to the dumb devices to be source ip natted so that they appear to come from the router itself 172.16.144.1, so that any devices on the
172.16.144.0/20 network that can't understand default gateway, can at least respond since the source address they will see will be the router itself and within their same subnet.

     How would this be accomplished? Is it as simple as putting 'ip nat inside' on the interface facing the dumb devices? Or is there more to it?

Mike-
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/