[c-nsp] Resilient Ethernet Protocol (REP)

[Fernando Cardoso]

The solution works very well, the only problem is that I have to dedicate all interface for one client, but in this particular situation there is no problem...

I appreciate very much the help provided from Dimitris Befas and them from Michalis Bersimis


-----Mensagem original-----
De: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] Em nome de michalis.bersimis at hq.cyta.gr
Enviada: quinta-feira, 11 de janeiro de 2018 13:28
Para: cisco-nsp at puck.nether.net
Assunto: Re: [c-nsp] Resilient Ethernet Protocol (REP)

I don't have a ME3600 that in ME3800 I have used the following configuration , which applies only xconnect to the whole interface, and can pass all frames inside the EoMPLS tunnel


Me 3600 PE1:
interface GigabitEthernet0/xx
no switchport
 mtu 9216
 no ip address
service-policy input ratelimit_200Mb
xconnect xxx.xxx.xxx.xxx 100 encapsulation mpls

Me 3600 PE2:
interface GigabitEthernet0/yy
no switchport
 mtu 9216
 no ip address
service-policy input ratelimit_200Mb
xconnect yyy.yyy.yyy.yyy 100 encapsulation mpls

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/