[c-nsp] ASR 901 MPLS issues

[somphong pokfai]

@6500
interface GigabitEthernet2/1
 no switchport

@901 pop vlan

 add cli under service instance
 rewrite ingress tag pop 1 symmetric

On Fri, Jan 26, 2018 at 7:45 AM, Nathan Lannine <nathan.lannine at gmail.com>
wrote:

> >
> > 6500
> >>
> >> interface GigabitEthernet2/1
> >>    description to switch 2 (handoff)
> >>    switchport
> >>    switchport trunk encapsulation dot1q
> >>    switchport trunk allowed vlan none
> >>    switchport mode trunk
> >>    switchport nonegotiate
> >>    mtu 9216
> >>
> >> interface GigabitEthernet2/1.100
> >>    description vlan100
> >>    encapsulation dot1Q 100
> >>    xconnect 10.100.102.1 100 encapsulation mpls
> >>
> >>
> I do not believe I have ever seen a layer-3 subinterface construct under a
> layer-2 interface on a 6500.  Could it be the "switchport" config is
> causing a problem?  Would it not work if you configured "no switchport" on
> the parent interface?
>
> - Nathan
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 

Regards,

Somphong Pokfai

Contracted Outsourcing Engineer

Advanced Information Technology PCL.

Mobile: +66 9-4235-6982

AITMA (S.H.I.E.L.D) Team

Phone : +66 2104 1761, +66 9-0907-0641

E-mail: catma at ait.co.th, tigma at ait.co.th <catma at ait.co.th>