[c-nsp] GRE tunnel issue - ASR 903

[Mouniri Md]

Hello Gauthier,

Thanks for your feedback.
I'll find out another way then.

Regards,
Mouniri

⁣Envoyé par BlueMail ​

Le 13 mars 2018 à 14:28, à 14:28, Gauthier DOUCHET <gauthier.douchet at gmail.com> a écrit:
>Hello Mouniri,
>
>I met the same problem with a GRE tunnel on ARS920.
>At this moment, I haven't found a working solution.
>I tried to play with MTU values but didn't seem to have an impact.
>
>Gauthier
>
>2018-03-12 21:24 GMT+01:00 Mouniri Md <mouniri.mdahoma at gmail.com>:
>
>> Hello all,
>>
>> I tested gre tunnel on a ASR 903 and I have slow speed (less than
>10Mbps)
>> when doing some iperf test whereras when gre tunnel is not used I can
>reach
>> the wire speed.
>> I tried to play with the mtu without success.
>>
>> Do someone have already experiencing this? It looks like that gre
>trafic
>> is handled in cpu and not in hard, but I cannot find any
>documentation
>> explaining this.
>>
>> Thank you for your help.
>>
>> Regards,
>> Mouniri
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>
>
>
>-- 
>Gauthier DOUCHET