[c-nsp] Nexus 3548 and VDCs

[Ahmed Elnagar]

Interesting, it is supposed that VDCs are supported only on 7K

Best Regards,
Ahmed Elnagar | CCIE#24697, CCNP R&S/DC

-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mike Hammett
Sent: Sunday, February 25, 2018 4:06 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Nexus 3548 and VDCs

We recently upgraded our Nexus 3548 from version 6.0(2)A1(1d) to version 7.0(3)I7(3). We can get in from one of the trunk ports feeding the switch, but there is no traffic passing through to other ports. 

I'm not fully versed on the process as I wasn't the one doing it, just putting in keyboard time looking for resolutions. 

1) Cisco doesn't seem to list any documentation for NX-OS 7 on the 3548, yet 7 is the only available software download on their support site. Some of the links take me to the 3600. No idea if that's correct. 
2) It looks like along the way, we got a vdc section added to our config, but the only instance of vdc I can find applies to 7000 series switches. Is that supposed to be there? Should I just follow the 7000's config for VDCs? 





-----
Mike Hammett
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/