[c-nsp] What causes mac table relearning?

[Aaron1]

You say you weren’t running spanning tree, but I thought topology change notification bridge PDUs caused a Mac flush, I don’t know For sure

Aaron

> On Oct 17, 2018, at 4:32 PM, Mike <mike-cisconsplist at tiedyenetworks.com> wrote:
> 
> Hi,
> 
> 
>     I have a network consisting of 3560g switches and I do not run spanning tree in this network. I have noticed a symptom when a vlan trunk interface goes down/up,  all mac addresses in the vlans carried by that trunk also seem to be cleared at the same time. Im not just talking the mac addresses on the port itself; rather, across the other switches themselves , even for mac addresses that have no connection to the port itself they just happen to be in one of the vlans. If I have missed something fundamental I'd love to know but I am not aware of any lan switching rules that would require this behavior.
> 
> 
> Mike-
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/