[c-nsp] Has there been a Cisco network device with GE management port while other ports are FE or lower?

[cnsp at marenda.net]

> > Also - the only other place you might see it is on a 8xx series
> router.
>
> Yes, for example in Cisco 891, which has a 1GigE WAN port:
> https://i.ebayimg.com/images/i/112239287188-0-1/s-l1000.jpg
>
>
> In summary, if GigabitEthernet0 is not the only GigabitEthernet port,
> then it is definitely a management Ethernet interface. If
> GigabitEthernet0 is the only GigabitEthernet port, then it is
> impossible to say, if it is a management port(for example, CSR running
> IOS XE 3.10S or ASR with slower/non-ethernet line cards) or
> non-management port(for example, some Cisco 800 series models)?

No....
Again, here comes the famous 800 Series:
C891F and C89[67]VA have a 8 port Gigethernet-switch (no longer the FE
Switch form the not so famous 89[12] ), one GE WAN Port (combo) and one FE
WAN Port.
Gig0 is here one of the embedded switch-ports, while the WAN Port ist Gig8 .
There is no special (feature-fewer) "Mangement" Port where varying named
(not changeable) VRFs are hardcoded.

Juergen.