[c-nsp] ASR9K XR 6.4.2 and SNMP monitoring

[Bruce Pinsky]

On 12/17/2019 2:30 PM, Lee Starnes wrote:
> Hello everyone,
> 
> I am trying to find out if there is a way to monitor the CRIT, MAJ, MIN and
> Fail alarms via SNMP. I read through a boatload of documentation on SNMP
> monitoring for the ASR but was not able to find anything on these alarms. I
> want to poll the system for status, bit trap send them.
> 
> Does anyone know if this is possible?
> These are the alarms we are looking for,
> #sh environment leds
> Tue Dec 17 14:25:26.016 PST
> R/S/I   Modules LED             Status
> 0/RSP0/*
>          host    Critical-Alarm  Off
>          host    Major-Alarm     Off
>          host    Minor-Alarm     Off
>          host    ACO             Off
>          host    Fail            Off
> 0/RSP1/*
>          host    Critical-Alarm  Off
>          host    Major-Alarm     Off
>          host    Minor-Alarm     Off
>          host    ACO             Off
>          host    Fail            Off
> 

Have you looked at the Entity Alarm MIB?

ftp://ftp.cisco.com/pub/mibs/v2/CISCO-ENTITY-ALARM-MIB.my

Full list of ASR1K MIBs here
ftp://ftp.cisco.com/pub/mibs/supportlists/asr1000/asr1000-supportlist.html

-- 
=========
bep