[c-nsp] ASR9K XR 6.4.2 and SNMP monitoring

[Lee Starnes]

Hello Bruce,

I did check out both the alarm and environment MIBs and none of the OIDs in
them come back as valid. In fact, a walk of those enterprise OIDs results
in no such object on this agent.

Best,

-Lee

On Tue, Dec 17, 2019 at 2:44 PM Bruce Pinsky <bep at whack.org> wrote:

> On 12/17/2019 2:30 PM, Lee Starnes wrote:
> > Hello everyone,
> >
> > I am trying to find out if there is a way to monitor the CRIT, MAJ, MIN
> and
> > Fail alarms via SNMP. I read through a boatload of documentation on SNMP
> > monitoring for the ASR but was not able to find anything on these
> alarms. I
> > want to poll the system for status, bit trap send them.
> >
> > Does anyone know if this is possible?
> > These are the alarms we are looking for,
> > #sh environment leds
> > Tue Dec 17 14:25:26.016 PST
> > R/S/I   Modules LED             Status
> > 0/RSP0/*
> >          host    Critical-Alarm  Off
> >          host    Major-Alarm     Off
> >          host    Minor-Alarm     Off
> >          host    ACO             Off
> >          host    Fail            Off
> > 0/RSP1/*
> >          host    Critical-Alarm  Off
> >          host    Major-Alarm     Off
> >          host    Minor-Alarm     Off
> >          host    ACO             Off
> >          host    Fail            Off
> >
>
> Have you looked at the Entity Alarm MIB?
>
> ftp://ftp.cisco.com/pub/mibs/v2/CISCO-ENTITY-ALARM-MIB.my
>
> Full list of ASR1K MIBs here
> ftp://ftp.cisco.com/pub/mibs/supportlists/asr1000/asr1000-supportlist.html
>
> --
> =========
> bep
>
>
>