[c-nsp] ASR1002-X + SPA-1X10GE-L-V2 (10gb)
Andrew K.
andrew at vianet.ca
Thu Jul 25 10:07:30 EDT 2019
I have this same issue with this same behavior. A reboot was also
required to get it to detect. The kicker is we have one of these cards
in the chassis working already. TAC told me to RMA the SPA.
We are sending a second SPA-1X10GE-L-V2 that was tested in an ASR1002
(not an X, all we had to test).
#sh ver
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M),
Version 15.2(4)S7, RELEASE SOFTWARE (fc4)
IOS XE Version: 03.07.07.S
#sh plat
Chassis type: ASR1002-X
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ASR1002-X ok 7w1d
0/0 6XGE-BUILT-IN ok 7w1d
0/1 SPA-1X10GE-L-V2 out of service 2w0d
0/2 SPA-1X10GE-L-V2 ok 7w1d
R0 ASR1002-X ok, active 7w1d
F0 ASR1002-X ok, active 7w1d
P0 ASR1002-PWR-AC ok 7w1d
P1 ASR1002-PWR-AC ok 7w1d
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 12042303 15.2(4r)S1
R0 12042303 15.2(4r)S1
F0 12042303 15.2(4r)S1
#sh hw-module subslot all oir
Module Model Operational Status
------------- -------------------- ------------------------
subslot 0/0 6XGE-BUILT-IN ok
subslot 0/1 SPA-1X10GE-L-V2 out of service(failed too many times)
subslot 0/2 SPA-1X10GE-L-V2 ok
On 7/25/2019 8:49 AM, Sheremet Roman wrote:
> Hi,
>
> We have Cisco ASR1002-X
> Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSAL-M), Version 15.3(2)S1, RELEASE SOFTWARE (fc1)
> IOS XE Version: 03.09.01.S
>
> and 10g module SPA-1X10GE-L-V2
>
> So, module wont work, anyone use same? OIR not detect this module
> automatically but after reload module not works also...
>
>
> Please look my details:
>
> Border-ASR1002#sh hw-module subslot all oir
> Module Model Operational Status
> ------------- -------------------- ------------------------
> subslot 0/0 6XGE-BUILT-IN ok
> subslot 0/1 SPA-1X10GE-L-V2 out of service(failed too many times)
> subslot 0/2 SPA-8X1GE-V2 ok
>
> Border-ASR1002#sh platform hardware slot 0 spa status
> Bay SPA Type State PST POK SOK PENB RST DENB HSS
> -------------------------------------------------------------------------------
> 0 6XGE-BUILT-IN Online 0 1 1 1 1 0 1
> 1 SPA-1XTENGE-XFP-V2 Offline 0 0 0 0 0 1 0
> 2 SPA-8X1GE-V2 Online 0 1 1 1 1 0 1
> 3 Empty Detection 1 0 0 0 0 1 0
>
> Border-ASR1002#sh hw-module all fpd
>
> ==== ====================== ====== =============================================
> H/W Field Programmable Current Min. Required
> Slot Card Type Ver. Device: "ID-Name" Version Version
> ==== ====================== ====== ================== =========== ==============
> 0/0 6XGE-BUILT-IN 1.0 1-2KP HSPA BULLSEY 2.34 2.34
> ---- ---------------------- ------ ------------------ ----------- --------------
> 0/1 SPA-1X10... <DISABLED> 1.2 1-10GE I/O FPGA 1.9 1.9
> ---- ---------------------- ------ ------------------ ----------- --------------
> 0/2 SPA-8X1GE-V2 1.0 1-GE I/O FPGA 1.10 1.10
> ==== ====================== ====== =============================================
>
> Border-ASR1002#sh platform
> Chassis type: ASR1002-X
>
> Slot Type State Insert time (ago)
> --------- ------------------- --------------------- -----------------
> 0 ASR1002-X ok 04:21:49
> 0/0 6XGE-BUILT-IN ok 04:20:55
> 0/1 SPA-1X10GE-L-V2 out of service 04:19:44
> 0/2 SPA-8X1GE-V2 ok 04:20:54
> R0 ASR1002-X ok, active 04:21:49
> F0 ASR1002-X ok, active 04:21:49
> P0 ASR1002-PWR-AC ok 04:21:20
> P1 ASR1002-PWR-AC ok 04:21:19
>
>
> Logs:
>
> Jul 25 08:06:36.160: %SPA_OIR-3-HW_INIT_TIMEOUT: subslot 0/1
> Jul 25 08:06:41.160: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting recovery by reloading SPA
> Jul 25 08:06:41.161: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in subslot 0/1
> Jul 25 08:06:41.161: %IOSXE_RP_ALARM-6-INFO: CLEAR CRITICAL SPA subslot 0/1 Failed
> Jul 25 08:06:41.161: %IOSXE_RP_ALARM-6-INFO: ASSERT MAJOR SPA subslot 0/1 Unknown state
> Jul 25 08:06:50.518: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1: SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync, sink in sync, spa: src not in sync, sink in sync).
> Jul 25 08:06:55.518: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting recovery by reloading SPA
> Jul 25 08:06:55.519: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in subslot 0/1
> Jul 25 08:07:03.528: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1: SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync, sink in sync, spa: src not in sync, sink in sync).
> Jul 25 08:07:08.528: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting recovery by reloading SPA
> Jul 25 08:07:08.528: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in subslot 0/1
> Jul 25 08:07:16.525: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1: SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync, sink in sync, spa: src not in sync, sink in sync).
> Jul 25 08:07:21.525: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting recovery by reloading SPA
> Jul 25 08:07:21.525: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2) offline in subslot 0/1
>
>
>
More information about the cisco-nsp
mailing list