[c-nsp] ASR1002-X + SPA-1X10GE-L-V2 (10gb)
Aaron
dudepron at gmail.com
Fri Jul 26 19:46:25 EDT 2019
has this card worked in a different chassis?
i suspect a bad card
On Thursday, July 25, 2019, Andrew K. <andrew at vianet.ca> wrote:
> I have this same issue with this same behavior. A reboot was also required
> to get it to detect. The kicker is we have one of these cards in the
> chassis working already. TAC told me to RMA the SPA.
>
> We are sending a second SPA-1X10GE-L-V2 that was tested in an ASR1002 (not
> an X, all we had to test).
>
> #sh ver
> Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M),
> Version 15.2(4)S7, RELEASE SOFTWARE (fc4)
>
> IOS XE Version: 03.07.07.S
>
> #sh plat
> Chassis type: ASR1002-X
>
> Slot Type State Insert time (ago)
> --------- ------------------- --------------------- -----------------
> 0 ASR1002-X ok 7w1d
> 0/0 6XGE-BUILT-IN ok 7w1d
> 0/1 SPA-1X10GE-L-V2 out of service 2w0d
> 0/2 SPA-1X10GE-L-V2 ok 7w1d
> R0 ASR1002-X ok, active 7w1d
> F0 ASR1002-X ok, active 7w1d
> P0 ASR1002-PWR-AC ok 7w1d
> P1 ASR1002-PWR-AC ok 7w1d
>
> Slot CPLD Version Firmware Version
> --------- ------------------- ---------------------------------------
> 0 12042303 15.2(4r)S1
> R0 12042303 15.2(4r)S1
> F0 12042303 15.2(4r)S1
>
>
> #sh hw-module subslot all oir
> Module Model Operational Status
> ------------- -------------------- ------------------------
> subslot 0/0 6XGE-BUILT-IN ok
> subslot 0/1 SPA-1X10GE-L-V2 out of service(failed too many times)
> subslot 0/2 SPA-1X10GE-L-V2 ok
>
>
>
> On 7/25/2019 8:49 AM, Sheremet Roman wrote:
>
>> Hi,
>>
>> We have Cisco ASR1002-X
>> Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-UNIVERSAL-M),
>> Version 15.3(2)S1, RELEASE SOFTWARE (fc1)
>> IOS XE Version: 03.09.01.S
>>
>> and 10g module SPA-1X10GE-L-V2
>>
>> So, module wont work, anyone use same? OIR not detect this module
>> automatically but after reload module not works also...
>>
>>
>> Please look my details:
>>
>> Border-ASR1002#sh hw-module subslot all oir
>> Module Model Operational Status
>> ------------- -------------------- ------------------------
>> subslot 0/0 6XGE-BUILT-IN ok
>> subslot 0/1 SPA-1X10GE-L-V2 out of service(failed too many times)
>> subslot 0/2 SPA-8X1GE-V2 ok
>>
>> Border-ASR1002#sh platform hardware slot 0 spa status
>> Bay SPA Type State PST POK SOK PENB RST
>> DENB HSS
>> ------------------------------------------------------------
>> -------------------
>> 0 6XGE-BUILT-IN Online 0 1 1 1 1 0
>> 1
>> 1 SPA-1XTENGE-XFP-V2 Offline 0 0 0 0 0 1
>> 0
>> 2 SPA-8X1GE-V2 Online 0 1 1 1 1 0
>> 1
>> 3 Empty Detection 1 0 0 0 0 1
>> 0
>>
>> Border-ASR1002#sh hw-module all fpd
>>
>> ==== ====================== ====== ==============================
>> ===============
>> H/W Field Programmable Current Min.
>> Required
>> Slot Card Type Ver. Device: "ID-Name" Version
>> Version
>> ==== ====================== ====== ================== ===========
>> ==============
>> 0/0 6XGE-BUILT-IN 1.0 1-2KP HSPA BULLSEY 2.34
>> 2.34
>> ---- ---------------------- ------ ------------------ -----------
>> --------------
>> 0/1 SPA-1X10... <DISABLED> 1.2 1-10GE I/O FPGA 1.9 1.9
>> ---- ---------------------- ------ ------------------ -----------
>> --------------
>> 0/2 SPA-8X1GE-V2 1.0 1-GE I/O FPGA 1.10
>> 1.10
>> ==== ====================== ====== ==============================
>> ===============
>>
>> Border-ASR1002#sh platform
>> Chassis type: ASR1002-X
>>
>> Slot Type State Insert time (ago)
>> --------- ------------------- --------------------- -----------------
>> 0 ASR1002-X ok 04:21:49
>> 0/0 6XGE-BUILT-IN ok 04:20:55
>> 0/1 SPA-1X10GE-L-V2 out of service 04:19:44
>> 0/2 SPA-8X1GE-V2 ok 04:20:54
>> R0 ASR1002-X ok, active 04:21:49
>> F0 ASR1002-X ok, active 04:21:49
>> P0 ASR1002-PWR-AC ok 04:21:20
>> P1 ASR1002-PWR-AC ok 04:21:19
>>
>>
>> Logs:
>>
>> Jul 25 08:06:36.160: %SPA_OIR-3-HW_INIT_TIMEOUT: subslot 0/1
>> Jul 25 08:06:41.160: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting
>> recovery by reloading SPA
>> Jul 25 08:06:41.161: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2)
>> offline in subslot 0/1
>> Jul 25 08:06:41.161: %IOSXE_RP_ALARM-6-INFO: CLEAR CRITICAL SPA subslot
>> 0/1 Failed
>> Jul 25 08:06:41.161: %IOSXE_RP_ALARM-6-INFO: ASSERT MAJOR SPA subslot 0/1
>> Unknown state
>> Jul 25 08:06:50.518: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1:
>> SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync,
>> sink in sync, spa: src not in sync, sink in sync).
>> Jul 25 08:06:55.518: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting
>> recovery by reloading SPA
>> Jul 25 08:06:55.519: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2)
>> offline in subslot 0/1
>> Jul 25 08:07:03.528: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1:
>> SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync,
>> sink in sync, spa: src not in sync, sink in sync).
>> Jul 25 08:07:08.528: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting
>> recovery by reloading SPA
>> Jul 25 08:07:08.528: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2)
>> offline in subslot 0/1
>> Jul 25 08:07:16.525: %IOSXE_SIP_SPA-3-SPI4_NOTSYNC: SIP0/1:
>> SPA-1X10GE-L-V2[0/1]: Can not synchronize SPI4 bus (host: src not in sync,
>> sink in sync, spa: src not in sync, sink in sync).
>> Jul 25 08:07:21.525: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting
>> recovery by reloading SPA
>> Jul 25 08:07:21.525: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1X10GE-L-V2)
>> offline in subslot 0/1
>>
>>
>>
>> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
More information about the cisco-nsp
mailing list