[c-nsp] ASR1k mlppp speedlimit?

[Stephen Fulton]

Try:

interface Virtual-TemplateX
  bandwidth x

HTH.

On 2020-02-19 10:30, Harald Kapper wrote:
> Hey Brian,
> thx for coming back.
> 
>> Are you sure the CPE will push over 100Mbps in mlppp?
> 
> Yep, it already does 200Mbps MLPPP, reaching at most a 50% cpu usage.
> 
> Now in the meantime we got a theory:
> Single PPPoE session gets max-speed available, obviously ignoring the BW info
> bound to our Virtual-Interfaces.
> It _seems_ MLPPP somehow honors the BW info the Virtual-Interface presents:
> 
> sh int Vi2.304
> Virtual-Access2.304 is up, line protocol is up
>    Hardware is Virtual Access interface
>    Description: PPPoE-transport
>    Interface is unnumbered. Using address of Loopback0
>    MTU 1492 bytes, BW 100000 Kbit/sec, DLY 100000 usec,
> 
> --
> Now the only question that's bothering us:
> How does one change this BW value for VIs?
> 
> Any hints greatly appreciated.
> 
> Regards, hk
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>