[c-nsp] Cisco N540-ACC-SYS ipv4 routes

[Jason Lixfeld]

Hi,

I don’t know the exact RIB scale, if there is one, short of what available memory will hold.  That said, it’s got 8GB of memory, and I’ve seen 1.7M+ BGP prefixes with the BGP process consuming about 1.9GB of memory.

It won’t hold a full table in FIB. 350K max, protocol independent, depending on the prefix size.

SRD is implemented using table-policy.

> On Jul 8, 2020, at 3:02 PM, Vikas Sharma <vikassharmas at gmail.com> wrote:
> 
> Dear,
> 
> Can someone please confirm how many routes are supported in above model in
> both rib and fib?
> 
> Also, I am not able to find table-map command for this router.
> 
> Any suggestions?
> 
> Regards,
> 
>     Vikas
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/