[c-nsp] Cisco N540-ACC-SYS ipv4 routes

[Vikas Sharma]

Many thanks Jason for your quick response.

If possible please also confirm the rib/fib limits of ASR1002-HX.

I have two choices to be used as IGW, ASR1002-HX or C 540 X and I want to
choose the best of the two options.

Regards,
Vikas

On Thu, 9 Jul, 2020, 12:52 am Jason Lixfeld, <jason at lixfeld.ca> wrote:

> Hi,
>
> I don’t know the exact RIB scale, if there is one, short of what available
> memory will hold.  That said, it’s got 8GB of memory, and I’ve seen 1.7M+
> BGP prefixes with the BGP process consuming about 1.9GB of memory.
>
> It won’t hold a full table in FIB. 350K max, protocol independent,
> depending on the prefix size.
>
> SRD is implemented using table-policy.
>
> > On Jul 8, 2020, at 3:02 PM, Vikas Sharma <vikassharmas at gmail.com> wrote:
> >
> > Dear,
> >
> > Can someone please confirm how many routes are supported in above model
> in
> > both rib and fib?
> >
> > Also, I am not able to find table-map command for this router.
> >
> > Any suggestions?
> >
> > Regards,
> >
> >     Vikas
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>