[c-nsp] Cisco N540-ACC-SYS ipv4 routes

[Vikas Sharma]

Many thanks Jason.

Regards,
Vikas

On Thu, 9 Jul, 2020, 6:39 am Jason Lixfeld, <jason at lixfeld.ca> wrote:

> I’m not as familiar with the ASR1002-HX, but what I’m pretty sure of is if
> you’re considering the ASR1002-HX for IGW, you may want to review Juniper’s
> MX204.  It’s probably going to be slightly more expensive than a NCS540,
> but far less expensive than the ASR1002-HX, but overall it will be a much
> better bang for your buck as an IGW.
>
> On Jul 8, 2020, at 8:48 PM, Vikas Sharma <vikassharmas at gmail.com> wrote:
>
> Many thanks Jason for your quick response.
>
> If possible please also confirm the rib/fib limits of ASR1002-HX.
>
> I have two choices to be used as IGW, ASR1002-HX or C 540 X and I want to
> choose the best of the two options.
>
> Regards,
> Vikas
>
> On Thu, 9 Jul, 2020, 12:52 am Jason Lixfeld, <jason at lixfeld.ca> wrote:
>
>> Hi,
>>
>> I don’t know the exact RIB scale, if there is one, short of what
>> available memory will hold.  That said, it’s got 8GB of memory, and I’ve
>> seen 1.7M+ BGP prefixes with the BGP process consuming about 1.9GB of
>> memory.
>>
>> It won’t hold a full table in FIB. 350K max, protocol independent,
>> depending on the prefix size.
>>
>> SRD is implemented using table-policy.
>>
>> > On Jul 8, 2020, at 3:02 PM, Vikas Sharma <vikassharmas at gmail.com>
>> wrote:
>> >
>> > Dear,
>> >
>> > Can someone please confirm how many routes are supported in above model
>> in
>> > both rib and fib?
>> >
>> > Also, I am not able to find table-map command for this router.
>> >
>> > Any suggestions?
>> >
>> > Regards,
>> >
>> >     Vikas
>> > _______________________________________________
>> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> > https://puck.nether.net/mailman/listinfo/cisco-nsp
>> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
>