[c-nsp] telemetry on IOS XE

[Dave Bell]

Have you enabled netconf-yang?

On Fri, 19 Jun 2020 at 20:46, Robert Hass <robhass at gmail.com> wrote:

> Hi
> I'm trying to run telemetry on IOS XE (Catalyst 9300) but without lack.
>
> My config:
>
> test#sh run | sec tele
> telemetry ietf subscription 1
>  encoding encode-kvgpb
>  filter xpath
> /process-cpu-ios-xe-oper:cpu-usage/cpu-utilization/five-seconds
>  source-address 10.0.0.147
>  source-vrf Mgmt-vrf
>  stream yang-push
>  update-policy periodic 500
>  receiver ip address 10.0.3.16 12345 protocol grpc-tcp
>
> But it's not working:
> #show telemetry ietf subscription all
> The process for the command is not responding or is otherwise unavailable
>
> Any ideas ?
>
> Running IOS XE  17.02.01
>
> Rob
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>