[c-nsp] cli auto-complete on configured names

[Nick Cutting]

There is a little bit of this on NXOS now - just a bit more each release, like tabbing out man-made prefix lists

From: cisco-nsp <cisco-nsp-bounces at puck.nether.net> On Behalf Of aaron1 at gvtc.com
Sent: Wednesday, September 2, 2020 5:44 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] cli auto-complete on configured names

This message originates from outside of your organisation.

RP/0/0/CPU0:r22#sh mpls traffic-eng tunnels name ?

r22--->r20 Tunnel name (if contains space, enclose name with " ")

r20--->r22 Tunnel name (if contains space, enclose name with " ")

r25_t101 Tunnel name (if contains space, enclose name with " ")

WORD Tunnel name (if contains space, enclose name with " ")



RP/0/0/CPU0:r22#sh mpls traffic-eng tunnels name r22--->r20





Beautiful. Whoever coded this must've spent some time working with Juniper
on Junos.



I rarely ever see IOS/XE/XR have an auto-complete (tab key) on configured
names of items.



Thanks!





Aaron

aaron1 at gvtc.com<mailto:aaron1 at gvtc.com>



_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp<https://protect-eu.mimecast.com/s/FMCeCnZKVCG9p2CNVGZn?domain=puck.nether.net>
archive at http://puck.nether.net/pipermail/cisco-nsp/<https://protect-eu.mimecast.com/s/wiEQCoYL9tX2pRu6Bj1Q?domain=puck.nether.net>